Icom A220 Instruction Manual - Page 24
Scanning the weather memory channels, Using the remote control
View all Icom A220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4 OTHER FUNCTIONS ■■Scanning the weather memory channels (For only U.S.A. version transceivers) Scanning automatically searches for weather channel signals. Repeatedly scans all weather memory channels. You can set the interval time (scan speed) for the scan in the Settings menu. Refer to page 22 for details. rrWhen no signal is received on the weather channel: • "NO WTH" is displayed even searches "WX01" to "WX10" channels for three times and the scan is cancelled. ttHold down [VOL] for two seconds to cancel the scan manually. qqPush [RCL] to enter the memory mode, and then rotate [O-DIAL] to select the weather memory channel. wwHold down [VOL] for two seconds to start a weather memory channel scan. • "SEARCH" blinks while scanning. • To change the scan direction, turn [DIAL]. • The scan continues even when receiving a signal on the active frequency. RX WEATHER 122.00 162.555 SEARCH eeWhen receiving a signal on the weather channel: • "RX" blinks on the standby frequency display and the scan is cancelled. • "DUAL" is displayed on the active frequency display. RX DUAL WEATHER RX 122.00 161.655 WX08 17