Icom D-STAR Instruction Manual - Page 25

n COM port confirmation D Microsoft® Windows® XP/2000 Click Click Click 4 DRIVER INSTALLATIONS After the driver installation, confirm the driver availability and the port number are recommended. In this section, COM port number confirmation of the ID-RP4000V [SERVICE T] connector is used for instruction example. q Start up Windows. w C onnect the PC and the ID-RP4000V [SERVICE T] connector through an USB cable (A-B type; purchase separately). e Right click "My Computer" then select "Properties." • "My Computer" is available in menu with Win- dows XP. r "System Properties" screen appears as at left. Click [Hardware] tub and then click [Device Man- ager]. t "Device Manager" screen appears. Click " " of Ports (COM&LPT). Check the connected unit and connector names, and COM port number. (In this example, the USB serial port number is "3.") y C onfirm "ICOM ID-RP4000V SERVICE T (COMQ)" is displayed. • If not displayed, or few COM port numbers are displayed at the same time, the driver installation may not be installed properly. Un-install the USB driver then reinstall the driver again in such cases. NOTE: "Q" is the COM port number, that is used for the communication setting with the utility software. "ICOM ID-RP4000V SERVICE T (COMQ) (COMQ)" 22