Icom D-STAR Instruction Manual - Page 4

1 SYSTEM OUTLINE The ID-RP4000V is installed into the Digital Smart Technologies for Amateur Radio (D-STAR) repeater system for operation. The ID-RP4000V never functions as a repeater without ID-RP2C, due to no relay function is built-in. n ID-RP4000V • ID-RP4000V is a 440 MHz digital voice and slowspeed data repeater (4.8 kbps) and connects to the ID-RP2C. NOTE: No audio CODEC is performed in the IDRP4000V, thus the ID-RP4000V receives and transmits 4.8 kbps serial data only. • Different frequencies are used for each transmission and reception in semi-duplex mode. • The ID-RP4000V utility software, supplied with the ID-RP4000V, and a PC are required for both receive and transmit frequency settings. Antenna ID-RP2L* ID-RP2C POWER 10 BESE-T SERVICE 1 SERVICE 2 ASSIST 1 ASSIST 2 POWER SERVICE T SERVICE R ID-RP4000V Repeater CIDo-ntRroPll2eV r Internet *ID-RP2L is not available in European countries by the present on March 2008. Area Zone Signal Internet