Icom D-STAR Instruction Manual - Page 33
Repeater Settings
View all Icom D-STAR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
6 REPEATER SETTINGS n Frequency setting for ID-RP4000V NOTE: The repeater unit connection may not be recognized with the PC according to the using USB cable length. Use the shorter USB cable as possible is recommended. q Start up the PC. w C onnect an USB cable (A-B type; purchase sepa- rately) between PC's USB port and ID-RP4000V [SERVICE T] or [SERVICE R] connector, then turn the ID-RP4000V power ON. • Connect an USB cable to [SERVICE R] when setting receive frequency. • Connect an USB cable to [SERVICE T] when setting transmit frequency. e Start up the ID-RP4000V utility. Double click the "ID-RP4000V" icon on the desktop or select the "ID-RP4000V" in "Program" in "Start" menu. r T he screen as at left appears, then the dialog below is displayed. • Click [OK]. w Click q Enter the specified frequency. NOTE: The screen, described in steps t, appears instead of these screens when the correct COM port number is set. • Click menu then select . Enter the allocated number of the ID-RP4000V [SERVICE T/R] connector then click [Apply] in the displayed "COM Port Setting" screen. Enter the COM port number. Click N OTE: See pages 22 to 24 for the COM port number confirmation details. t T he utility reads the ID-RP4000V setting and the screen as at left appears when the correct COM port number is set. y E nter the specified receive and transmit frequencies into "RX/TX Frequency" column. u C lick [Write] to program the set frequencies into the ID-RP4000V. 30