Icom F3201DEX / F4201DEX Operating Instructions - Page 20
Setting the Beep function, ROTARY SELECTOR], Lower], Upper]
View all Icom F3201DEX / F4201DEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3 BASIC OPERATION Setting the Beep function The Beep function can be turned ON or OFF. When it is OFF, the channel announcement is also turned OFF. NOTE: You should turn ON the Beep function when you set the microphone gain or the squelch level to check the current level setting with the beep sounding. (pp. 3-10, 3-11) qqRotate [VOL] to turn OFF the transceiver power. wwSet [ROTARY SELECTOR] to any channel other than Channel 16. eeWhile holding down [Lower], rotate [VOL] to turn ON the power to enter the Beep level adjustment mode. rrPush [Lower] to turn the Beep function ON or OFF. • When a beep sounds after pushing [Lower], the Beep function is ON. When no beep sounds after pushing [Lower], the Beep function is OFF. • If desired, push [Upper] to adjust the Beep level. See page 3-8 for details. ttRotate [VOL] to turn OFF the power to exit the Beep level adjustment mode. NOTE: This operation may not be available, depending on the presetting. [Upper] [Lower] [ROTARY SELECTOR] [VOL] 3-7