Icom IC-A120 Basic Manual - Page 10
BASIC OPERATION, Turning ON the transceiver
View all Icom IC-A120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 BASIC OPERATION ■■Turning ON the transceiver Hold down [ ] for 1 second to turn ON the transceiver. If the transceiver is preset for a start-up password, enter the 6 digits password. While in the Password Entry mode, "PASSWORD" is displayed. DDEntering the password Enter the password in the following manner. KEY 0 1 2 3 4 NUMBER 5 6 7 8 9 Example: If the password is 513824, push [SCAN], [PRI/DUAL], [MENU/CLR], [MENU/CLR], [SQL/ ], and then push [ /MHz/GRP]. • Note that each key represents 2 digits. That means, "123456" and "678901" are entered in exactly the same way (requires no multiple or extended pushing.) • The entered password will not be displayed. • If "PASSWORD" does not disappear after entering, the entered password is incorrect. Turn OFF the transceiver, and then try again. 3