Icom IC-A120 Basic Manual - Page 18

5 SPECIFICATIONS AND OPTIONS ■■Specifications (Measurements made without an antenna.) In Canada, use of 8.33 kHz Channel Spacing of this radio is strictly prohibited and shall not be used. DDGeneral • Frequency range: IC-A120 118.000 to 136.99166 MHz IC-A120E (AUS version) 118.000 to 136.97500 MHz IC-A120E (Others) 118.000 to 136.99166 MHz • Channel spacing: 25 kHz/8.33*1 kHz • Type of emission: IC-A120 6K00A3E/5K60A3E (FCC/EXP) 6K00A3E (Industry Canada) IC-A120E 6K80A3E/5K00A3E*1 • Number of memory channels: 200 • Antenna impedance: 50 ø (nominal) • Antenna connector: SO-239 • Power supply requirement: 13.75 V/27.5 V DC (negative ground) • Current drain (at 13.75 V): TX 5.0 A Maximum audio 4.0 A • Operating temperature range: IC-A120 -30˚C to +60˚C, -22˚F to +140˚F IC-A120E -20˚C to +55˚C • Dimensions: (projections not included) 161 (W)✕45 (H)✕175 (D) mm, 6.3 (W)✕1.8 (H)✕6.9 (D) inches • Weight (approximately): 1.5 kg, 3.3 lb *1 Except IC-A120E (AUS version). 11 DDTransmitter • Output power: IC-A120 9 W (Carrier power) typical IC-A120E 9 W±1.5 dB (+15˚C to +35˚C) 9 W+1.5 dB/-3dB (-20˚C to +55˚C) • Frequency stability: IC-A120 ±5 ppm (-30˚C to +60˚C, -22˚F to +140˚F) IC-A120E ±1 ppm (0˚C to +40˚C) • Modulation system: Last stage modulations • Audio frequency distortion:  IC-A120 Less than 10% (at 70% modulation) IC-A120E Less than 10% (at 85% modulation +3 dB) • Spurious emissions: IC-A120 Less than -60 dBc IC-A120E*2 9 kHz to 30 MHz Less than -46 dBm 30 MHz to 1 GHz Less than -36 dBm (For Harmonics) Less than -46 dBm (For Non-Harmonics) 1 GHz to 4 GHz Less than -30 dBm (For Harmonics) Less than -40 dBm (For Non-Harmonics) *2 Except for operating frequency ±1 MHz.