Icom IC-A120 Basic Manual - Page 19

5 SPECIFICATIONS AND OPTIONS DDReceiver • Receive system: Double conversion superheterodyne • Intermediate frequencies: 1st 38.85 MHz 2nd 450 kHz • Sensitivity: IC-A120 Less than 1 μV (pd) (at 6 dB S/N) IC-A120E Less than -101 dBm (12 dB SINAD with CCITT) • Squelch sensitivity: IC-A120 Less than 0.35 μV (pd) IC-A120E Less than -116 dBm • Spurious response rejection ratio: IC-A120 More than 5 mV (pd) IC-A120E More than 70 dB • Audio output power: External speaker More than 10 W (at 13.75 V DC with 8 Ω load 60% mod, 10% distortion) Side tone More than 100 mW (at 13.75 V DC with 500 Ω load 60% mod, 10% distortion) All stated specifications are subject to change without notice or obligation. ■■Options HM-217 speaker microphone The speaker microphone with keys and [P1]/[P2] keys. VS-3 Bluetooth® headset The Bluetooth® headset with a [PTT] switch. 05 UT-133A Bluetooth® unit OPC-871A headset adapter The adapter to connect a standard headset. OPC-478UC cloning cable The cable to connect a PC and the OPC-592 cloning cable adapter when you control the transceiver with the CI-V commands. OPC-592 cloning cable adapter The cable adapter to connect the transceiver and the OPC-478UC cloning cable when you control the transceiver with the CI-V commands. Approved Icom optional equipment is designed for optimal performance when used with an Icom transceiver. Icom is not responsible for the destruction or damage to an Icom transceiver in the event the Icom transceiver is used with equipment that is not manufactured or approved by Icom. 12