Icom IC-A120 Basic Manual - Page 11

■■Receiving and transmitting 1. Setting the frequency Setting the frequency in the Memory mode 1) Open the "MEMORY" menu. ➥ Push [ /MHz/GRP]. 2) Select "GROUPS" item. ➥ Push [∫] or [√], and then push [ /MHz/GRP]. 3) Select a desired group. ➥ Push [∫] or [√], and then push [ /MHz/GRP]. 4) Select a desired channel. ➥ Push [∫] or [√]. BASIC OPERATION 2 Setting the frequency in the VFO mode (For only EXP, USA, and EUR versions.) 1) Switch the transceiver to the VFO mode. ➥ Select "VFO MODE" group in the Menu mode and then push [ /MHz/GRP]. MENU > VFO MODE/MEMORY MODE 2) Set the MHz digit. ➥ Push [ /MHz/GRP], and then push [∫] or The MHz digit blinks. 3) Exit the MHz Digit Selection mode. ➥ Push [ /MHz/GRP] again. 4) Set the kHz digit. ➥ Push [∫] or [√]. TIP: You can select the channel spacing in the "CH SPACING" item*. MENU > SETTINGS > FUNCTIONS > CH SPACING *The menu may not be displayed, depending on the transceiver's presettings. Ask your authorized Icom dealer or transceiver administrator for details. CAUTION: In Canada, use of 8.33 kHz Channel Spacing of this radio is strictly prohibited and shall not be used. 1 02 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4