Icom IC-A6 Instruction Manual - Page 35

10 SPECIFICATIONS D General D Transmitter • Frequency coverage (MHz): TX 118.000 to 136.975 RX 108.000 to 136.975*1 WX 161.650 to 163.275*2 *1: IC-A24 only, IC-A6; 118.000 to 136.975 MHz *2: U.S.A. version only. • Mode : 6K00A3E 16K0G3E (161.65 to 163.275 MHz) • Channel spacing : 25 kHz • Number of memory channels : 200 (20 CH. × 10 BANK) • Power supply requirement : Specified battery packs/case or • Output power • Modulation • Modulation limiting • Audio harmonic distortion • Hum and noise ratio • Spurious emissions • Microphone connector : 5 W (PEP) typical 1.5 W (CW) typical : Low level modulation : 70 to 100% : Less than 10% (at60 % mod.) : More than 35 dB : More than 46 dB (except oper- ating frequency ±6.25 Hz range) : 3-conductor 2.5(d) mm (1/10˝)/ more than 100 kΩ 11.0 V DC at external DC jack D Receiver • Usable temp. range • Current drain : -10˚C to +60˚C (+14°F to +140°F) : • Receive system : Double conversion superheterodyne 9 Tx 1.5 A typical • Intermediate frequencies : 1st 30.05 MHz 10 Rx 70 mA typical (at stand by) 2nd 450 kHz 300 mA typical.(at AF max.) •Sensitivity VOR (AM 6dB S/N): Less than -3 dBµ typical • Antenna connector : BNC 50 Ω (nominal) • Dimensions : 54(W)×129.3(H)×35.5(D) mm (projections not incl.) 21⁄8(W) × 53⁄32(H) × 113⁄32(D) inch • Weight : Approx. 180 g (6.35 oz) (Without the battery pack and antenna.) COM (AM 6dB S/N): Less than -6 dBµ typical WX (FM 12dB SINAD): Less than -13 dBµ typical • Squelch sensitivity : AM Less than 0 dBµ FM Less than -7 dBµ • Selectivity : More than 7.5 kHz/-6 dB) Less than 25 kHz/-60 dB) • Spurious response : AM More than 60 dB rejection FM More than 30 dB • Audio output power : More than 500 mW typical (at 10% distortion with an 8 Ω load, 30% mod.) • Noise and hum : More than 40 dB at 30% mod. All stated specifications are subject to change without notice or obligation. • External SP connector : 3-conductor 3.5 (d) mm (1/8˝)/8 Ω 30