Icom IC-A6 Instruction Manual - Page 8
Clear Key [clr, Anl Key [anl, Emergency Key [121.5 Mhz], Dc Power Jack, Memory Mode Key [mr, Enter - battery charger
View all Icom IC-A6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
1 PANEL DESCRIPTION !1 CLEAR KEY [CLR•DEL] (pgs. 8-17) ➥ Push to turn to the frequency mode, when memory channel, WX channel, 121.5 MHz, squelch level setting or beep tone setting is selected. ➥Push , then push and hold [CLR•DEL] to delete a recall frequency data. ➥ Push to clear the entered comment of memory name while programming. ➥ Push to stop the scan function to turn to the frequency mode while the scan function is operating. !6 ENTER KEY [ENT•WX] (pgs. 8, 14) ➥ Push to enter the numeral input. Enters consecutive zero digits. (p. 8) ➥Push , then push [ENT•WX] to enter the weather channel selection mode (U.S.A. version only). (p. 8) ➥ Push to program the memory name. (p. 14) NOTE: Some functions may not be available depending on versions. Ask your authorized dealer for details. !2 ANL KEY [ANL•SCAN] (pgs. 9, 16, 17) ➥ Push to turn the ANL function ON or OFF. ➥ Push , then push [ANL•SCAN] to start the scan function. !3 EMERGENCY KEY [121.5 MHz] (p. 11) Push for 2 sec. to select the 121.5 MHz emergency frequency. • DC POWER CONNECTION IC-A24/A6 CP-20 (for 11 24 V) (optional) !4 DC POWER JACK Connect the AC adapter or optional cable to charge the battery pack or to operate by external power supply. (see right illustration) !5 MEMORY MODE KEY [MR•MW] (pgs. 12-15) ➥ Push to call the memory channel mode. ➥ Push , then push [MR•MW] to program the contents into the memory channels. 3 To [DC 11V] To the cigarette lighter socket Wall charger