Icom IC-F1000 Operating Guide
Icom IC-F1000 Manual
View all Icom IC-F1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Icom IC-F1000 manual content summary:
- Icom IC-F1000 | Operating Guide - Page 1
OPERATING GUIDE VHF TRANSCEIVERS iF1000 Series UHF TRANSCEIVERS iF2000 Series The photo shows the UHF transceivers. ▲ Non-display type ▲ Simple type ▲ 10-key type - Icom IC-F1000 | Operating Guide - Page 2
SAVE THIS OPERATING GUIDE - This operating guide contains important operating instructions for: • IC-F1000, IC-F1000S, and IC-F1000T VHF TRANSCEIVERS • IC-F2000, IC-F2000S, and IC-F2000T UHF TRANSCEIVERS Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in - Icom IC-F1000 | Operating Guide - Page 3
TABLE OF CONTENTS IMPORTANT i TABLE OF CONTENTS ii 1 PANEL DESCRIPTION 1-9 ■ Front, top and side panels 1 ■ Function display 3 ■ LED indicator 4 ■ Programmable function keys 5 2 BASIC OPERATION 10-19 ■ Selecting a channel 10 ■ Receiving and transmitting 10 ■ Emergency Call 12 ■ Lone - Icom IC-F1000 | Operating Guide - Page 4
three types of transceivers in the IC-F1000 and IC-F2000 series. IC-F1000/F2000: Non-display type IC-F1000S/F2000S:Simple type [display + 4 keys (P0-P3)] IC-F1000T/F2000T: 10-key type [ KEY [Emer] ➥➥ A desired function can be programmed by your dealer. * Names for the non-display type transceiver 1 - Icom IC-F1000 | Operating Guide - Page 5
User Set mode con- 10 tents, and so on. See page 3 for details. 11 y DEALER-ASSIGNABLE KEYS [P0]-[P3] 12 ➥➥ Desired functions can be independently programmed by your dealer. 13 14 u DEALER-ASSIGNABLE KEYS [UP] or [Upper]*, [DOWN] or [Lower]* 15 ➥➥ Desired functions can be independently - Icom IC-F1000 | Operating Guide - Page 6
1 PANEL DESCRIPTION ■ Function display q w ert y u i o !0 q SIGNAL STRENGTH INDICATOR ➥➥ Displays the relative receive signal strength level. w LOW POWER ICON ➥➥ Appears when low output power is selected. • W hen the battery charge decreases to a set level, low power is automatically selected. e - Icom IC-F1000 | Operating Guide - Page 7
F/S Scan L ow BATT1 R O PANEL DESCRIPTION 1 ■ LED indicator L ow BATT2 OO 1 2 The LED indicator indicates the status of various pTaXraLmowetBerAsToTf1 G G the transceiver as follows: • Receiving 3 (Reference: R=Red, G=Green, O=Orange) T X L ow BATT2 G 4 • Cloning (reading or - Icom IC-F1000 | Operating Guide - Page 8
, the following functions can be assigned to [P0], [P1], [P2], [P3], [Emer], [Up], and [Down]. Consult your Icom dealer or system operator for details concerning your transceiver's programming. CH UP/DOWN ➥➥As described in the following topics, after pushing a pro- grammed key, push [CH Up] or [CH - Icom IC-F1000 | Operating Guide - Page 9
PANEL DESCRIPTION 1 PRIORITY A CHANNEL, PRIORITY B CHANNEL LOCK 1 ➥➥Push to select the Priority A or Priority B channel. < for the Non-display type transceivers > ➥➥Hold down this key to lock all programmable keys except PRIORITY A CHANNEL (REWRITE), the followings: PRIORITY B CHANNEL ( - Icom IC-F1000 | Operating Guide - Page 10
or 5-Tone in the operating chan- nel. CALL A (CODE 1)/CODE B (CODE 2) // only for the LMR model // ➥➥Push to transmit a 2-Tone, that is programmed in channel 1 (Code A) or channel 2 (Code B). CALL A (CODE 30)/CODE B (CODE29) // only for the PMR model // ➥➥Push to transmit a 5-Tone as a station - Icom IC-F1000 | Operating Guide - Page 11
PANEL DESCRIPTION 1 SURVEILLANCE < for the Non-display type transceivers > TX CODE CH SELECT 1 // only for the Simple type and 10-key type transceivers // ➥➥Hold down to turn ON the Surveillance function. ➥➥Push [TX Code CH Select] to enter the TX code channel ➥➥Push to turn OFF the function - Icom IC-F1000 | Operating Guide - Page 12
1 PANEL DESCRIPTION TX CODE CH UP/DOWN // only for the PMR model (for the Simple type and 10-key type transceivers) // ➥➥Push to select a preprogrammed TX code channel. ➥➥Push to select a desired digit in the TX code edit mode. ID-MR SELECT // only for the PMR model (for the Simple type and 10-key - Icom IC-F1000 | Operating Guide - Page 13
2 BASIC OPERATION ■ Selecting a channel ■ Receiving and transmitting 1 2 There are several types of channel selections. Methods may CAUTION: differ, depending on the presetting. Consult your dealer for Attach an antenna before transmitting. 3 details. Transmitting without an antenna may - Icom IC-F1000 | Operating Guide - Page 14
2 BASIC OPERATION DDTransmitting notes • Transmit inhibit function The transceiver has several inhibit functions which restrict transmission under the following conditions: - The channel is busy. However, depending on the presettings, you can transmit when the call includes an unmatched (or - Icom IC-F1000 | Operating Guide - Page 15
selected channel. If you want to cancel the emergency call, hold down [Emergency] again before transmitting the call. If your transceiver is programmed for Silent operation, you can transmit an Emergency call without the beep sounding and the LED indicator lighting. • Auto TX function After an - Icom IC-F1000 | Operating Guide - Page 16
2 BASIC OPERATION ■ Lone Worker Emergency Call When the Lone Worker function is ON, and if no operation occurs for a set time period*, the transceiver automatically enters the emergency mode. Then the countdown for the emergency call transmission starts. After a set time period* has passed, an - Icom IC-F1000 | Operating Guide - Page 17
BASIC OPERATION 2 ■ User set mode 1 2 The User Set mode enables you to change various settings. Backlight You can "customize" the transceiver operation to suit your • ON: Always lights. 3 preferences and operating style. • AUT: L ights for 5 seconds when pushing any key except [PTT]. 4 - Icom IC-F1000 | Operating Guide - Page 18
2 BASIC OPERATION SQL (Squelch) Level Set the SQL level to between 0 to 9. The squelch function suppresses the noise output from a speaker when no signal is received. • 0: SQL Open • 2: SQL Threshold • 9: SQL Tight AF Min Level (Minimum audio output level) Set the audio output level when you rotate - Icom IC-F1000 | Operating Guide - Page 19
■ Setting the Beep function These instructions are for the non-display type transceivers. The Beep function can be turned ON or OFF. When it is OFF, the channel announcement is also - Icom IC-F1000 | Operating Guide - Page 20
2 BASIC OPERATION ■ Setting the Beep level These instructions are for the non-display type transceivers. The Beep level is adjustable between 1 and 5, or 1 (linked) and 5 (linked). When a Linked option is selected, the beep - Icom IC-F1000 | Operating Guide - Page 21
BASIC OPERATION 2 ■ Setting the Ringer level 1 These instructions are for the non-display type transceivers. The Ringer level can be adjusted between 1 and 5, or 1 NOTE: 2 This operation may not be selectable, depending on - Icom IC-F1000 | Operating Guide - Page 22
mode. NOTE: This operation may not be selectable, depending on the presetting. Ask your dealer for details. ■ Setting the squelch level These instructions are for the non-display type transceivers. The squelch circuit mutes the received audio signal, depending on the signal strength. qqRotate [VOL - Icom IC-F1000 | Operating Guide - Page 23
Check, Stun, and Revive calls. qqWhen a PTT ID is received: 4 • Beeps sound. 5 An additional feature of the MDC 1200 system included in Icom transceivers is called aliasing. Each transceiver on the • The calling station ID (or alias) is displayed. 6 system has a unique ID number. Aliasing - Icom IC-F1000 | Operating Guide - Page 24
the channel to stop the beep and the display indication. When you want to revive the stunned transceiver by entering a password, read the following instructions. qqTurn OFF the stunned transceiver once and then turn it ON again. wwThe illustration above is still displayed. Enter the required - Icom IC-F1000 | Operating Guide - Page 25
call without a beep emission, and the display indication, depending on the preset- 12 ting. (Silent operation) 13 The transceiver can also be programmed to keep the microphone open during an emergency call, allowing monitoring 14 the situation. Ask your dealer for details. 15 IMPORTANT: It - Icom IC-F1000 | Operating Guide - Page 26
A7122-3EX-3a © 2014-2019 Icom Inc. Jun. 2019 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
OPERATING GUIDE
The photo shows
the UHF transceivers.
▲
Non-display type
▲
Simple type
▲
10-key type
iF1000
Series
VHF TRANSCEIVERS
iF2000
Series
UHF TRANSCEIVERS