Icom IC-F1000 Operating Guide - Page 13
Basic Operation
View all Icom IC-F1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2 BASIC OPERATION ■ Selecting a channel ■ Receiving and transmitting 1 2 There are several types of channel selections. Methods may CAUTION: differ, depending on the presetting. Consult your dealer for Attach an antenna before transmitting. 3 details. Transmitting without an antenna may damage the transceiver. 4 NON-ZONE TYPE: 5 To select the desired operating channel: ➥➥Rotate [ROTARY SELECTOR]. Receiving: qqRotate [VOL] to turn ON the power. 6 ➥➥Push [CH Up] or [CH Down]. wwRotate [ROTARY SELECTOR], or push one of the memo- 7 ➥➥Push one of [MR-CH 1] to [MR-CH 4]. ➥➥Push [Prio A], [Prio B], [Prio A (Rewrite)] or [Prio B (Re- ry channel keys, [MR-CH1] to [MR-CH4], to select a channel. 8 write)]. ZONE TYPE: eeWhen receiving a call, adjust the audio output level to a 9 comfortable listening level. 10 To select the desired operating channel: ➥➥Push [Zone], then push [CH Up] or [CH Down]. Transmitting: 11 Wait until the channel is clear to avoid interference. qqWhile holding down [PTT], speak at a normal voice level. 12 AUTOMATIC SCAN TYPE: Channel setting is not necessary for this scan type. When wwRelease [PTT] to receive. 13 turning ON the power, the transceiver automatically starts IMPORTANT: To maximize the readability of your signal: 14 scanning. Scanning stops when a signal is received. 1. After pushing [PTT], pause briefly before you start speaking. 15 2. Hold the microphone 5 to 10 cm (2 to 4 inches) from 16 your mouth, then speak at a normal voice level. 10