Icom IC-F3210D / F4210D Operation Guide - Page 29
■ Position data transmission, ■ Status message transmission, ■ Encryption function
![]() |
View all Icom IC-F3210D / F4210D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
IDAS OPERATION 2 ■■Position data transmission ■■Status message transmission 1 When a GPS receiver is connected to the transceiver, the lon- The status message can be automatically transmitted. 2 gitude and latitude position data can be automatically trans- The status message is transmitted when: 3 mitted when: • A GPS request status message is received • The transceiver is turned ON or OFF - Set the status message to be transmitted in 'Power ON Status' or 4 • After sending a voice message 'Power OFF Status' item, respectively. 5 - S et the 'Send with Login' and 'Send with Logoff' items to 'Enable.' - Set the target station ID in 'Power Status ID,' 'Power Status ID for Single-site Trunk' or 'Power Status ID for Multi-site Trunk.' 6 • After sending a status message - Set the 'Send with Status Call' item to 'Enable.' • After sending a message • After sending a voice message - Set the 'Send with Voice Call' item to 'Enable.' 7 - Set the status message to be transmitted in 'Send Status Num- 8 ber' item. - Set the 'Send with SDM Call' item to 'Enable.' 9 • After sending a Call Alert - Set the 'Send with Call Alert' item to 'Enable.' ■■Encryption function 10 • After sending an Emergency call - Set the 'Send with Emergency' item to 'Enable.' 11 The encryption function enables voice scrambling, which pro- vides private digital communication between stations. 12 Ask your dealer or system operator for a GPS receiver connection details. ➥➥Push [Encryption] to turn the Encryption function ON or 13 OFF. 14 • " " (For the IC-F3230D/F4230D series transceivers) or " " (For the IC-F5220D/F6220D series transceivers) appears when 15 the Encryption function is ON. 16 27
![](/manual_guide/products/icom-icf3210d-f4210d-operation-guide-2d21289/29.png)