Icom IC-F3210D / F4210D Operation Guide - Page 8

1 PREPARATION ■■ Programmable key functions DD Programmable key functions (Continued) INDIVIDUAL N/A ➥➥Push to set the call type to "Individual," and automatically enter the application selection mode*. ➥➥If in the application selection mode, push to enter the Indi- vidual ID selection mode*. ➥➥If "STATUS" or "MSG" is selected as the application, push to enter the message selection mode. After selecting a message, push again to enter the Individual ID selection mode. ➥➥Hold down for 1 second to return to the standby mode. RESET ➥➥Push to reset the destination unit ID and call type to the default, if they have been changed by the manual operation. ➥➥Push to cancel the Talk Back function, if it is activated. ➥➥While in the selection mode (e.g. application, message and status message), push to return to the stand-by mode. In this case, the transceiver resets the destination unit ID, call type and Talk Back function. ROAM REQUEST (This key is used for only Multi-site Trunk operation.) Push to start a roaming scan, regardless of the error rate. TALKGROUP N/A ➥➥Push to set the call type to "Talkgroup," and automatically enter the application selection mode*. SITE LOCK (This key is used for only Multi-site Trunk operation.) Push to turn the Site Lock function ON or OFF. When the Site Lock function is ON, the transceiver is locked to the current registered site, and the roaming and the background scan are disabled. ➥➥If in the application selection mode, push to enter the Talk- group ID selection mode*. ➥➥If "STATUS" or "MSG" is selected as the application, push to enter the message selection mode. After selecting a message, push again to enter the Talkgroup ID selection mode. ➥➥Hold down for 1 second to return to the standby mode. * When the Digital/Individual/Talkgroup Key item is set to "ID Select" in the optional cloning software, the ID selection mode will be selected first. And while in the ID selection mode, push to select the application selection mode. 6