Icom IC-F3210D / F4210D Operation Guide - Page 7

PREPARATION 1 1 DIGITAL BUTTON STATUS UP, STATUS DOWN 2 N/A N/A 3 4 ➥➥Push to enter the application selection mode*. ➥➥When a received SDM (Short Data Message) is displayed, 5 ➥➥Hold down for 1 second to toggle the call type between push to cancel the automatic scroll and manually scroll the 6 Individual and Talkgroup, and automatically enter the application selection mode. message. ➥➥When an SDM that contains more than 8 characters is dis- 7 • Push [CH Up] or [CH Down] to select the desired application played, push to manually scroll the message. 8 from "VOICE," "CALLALRT," "STATUS" and "MSG." ➥➥In the standby mode, push to display the transmit status ➥➥While in the application selection mode, push to enter the and select a status number. 9 Individual or Talkgroup ID selection mode*. • Push [CH Up] or [CH Down] to select the desired ID name (or ID POWER OFF EMERGENCY 10 code). 11 • If "STATUS" or "MSG" is selected as the application, push this N/A key to enter the message selection mode. After selecting a mes- 12 sage, push again to enter the destination ID selection mode. (pp. 20, 22) ➥➥Hold down for 1 second to return to the standby mode. While holding down this key, turn OFF the transceiver to activate the Power OFF Emergency function. This function makes 13 14 * When the Digital/Individual/Talkgroup Key item is set to "ID Select" the transceiver transmit Emergency calls, even though it ap- 15 in the optional cloning software, the ID selection mode will be se- pears to be OFF. (p. 25) lected first. And while in the ID selection mode, push to select the When the function is activated, any key operation, hanger ac- 16 application selection mode. tion, Lone Worker function, LED and speaker are disabled. However, the transceiver can transmit Emergency calls ac- cording to the Emergency settings. To cancel the function and restore the transceiver, turn ON the transceiver's power. 5