Icom IC-F3210D / F4210D Operation Guide - Page 9

PREPARATION 1 1 SITE SELECT STATUS 2 N/A Hold down for 1 second to transmit the currently selected sta- 3 tus message to the specified station/Talkgroup. 4 (This key is used for only Multi-site Trunk operation.) 5 This key allows you to manually select a desired site without ➥➥While in the standby mode, push to directly enter the sta- 6 using a roaming scan. tus message selection mode, and then select a desired message using [CH Up] or [CH Down]. 7 q P ush [Site Select] to display the Site Select screen. ➥➥After selecting a message, push again to enter the Indi- 8 w P ush [CH Up] or [CH Down] to select a desired site from vidual or Talkgroup ID selection mode (depending on the the preprogrammed roaming list*. last selected call type). 9 * Up to 48 valid roaming areas are listed on the roaming list. Ask your dealer for details. ➥➥Hold down for 1 second to transmit the currently selected status message. 10 e P ush [Site Select] again to set the selected site, and return 11 to the standby mode. r T he transceiver tries to register to the selected site. MESSAGE 12 CALLALERT N/A 13 14 Hold down for 1 second to transmit a CallAlert to a specified station/Talkgroup. ➥➥While in the standby mode, push to directly enter the message selection mode, and then select a desired message 15 using [CH Up] or [CH Down]. 16 ➥➥After selecting a message, push again to enter the Indi- ➥➥Push to enter the target ID selection mode for CallAlert. vidual or Talkgroup ID selection mode (depending on the ➥➥Hold down for 1 second to transmit a CallAlert. last selected call type). ➥➥Hold down for 1 second to transmit the currently selected message. 7