Icom IC-F4230D Instruction Manual - Page 14

3 BASIC OPERATION ■■Channel selection ■■User set mode Several types of channel selections are available. Methods may differ, depending on your system set up. The User Set mode allows you to set seldom-changed settings. If the transceiver has [User Set Mode] assigned to it, you can "customize" the transceiver operation to suit your NON-ZONE TYPE: To select the desired operating channel: ➥➥Push [CH Up] or [CH Down]. ➥➥Push one of [MR-CH 1] to [MR-CH 4]. ➥➥Push one of these keys, [Prio A], [Prio B], [Prio A (Re- write)] or [Prio B (Rewrite)]. preferences and operating style. Entering the User Set mode: qqHold down [User Set Mode] for 1 second to enter the User Set mode. wwPush [User Set Mode] several times to select the appro- priate item. Then push [CH Up] or [CH Down] to set the desired level or condition. ZONE TYPE: To select the desired operating channel: ➥➥Push [Zone], then push [CH Up] or [CH Down]. • Selectable Set mode items are Backlight, Beep ON/OFF, Beep Level, Ringer Level, SQL Level, AF Min Level, Mic Gain, Battery Voltage, Signal Moni, Lone Worker and System Info. eeHold down [User Set Mode] for 1 second again to exit the VOTING OPERATION: The transceiver automatically starts scanning when a zone, specified for the voting operation, is selected. The voting scan detects the S-meter of the repeater and automatically selects the strongest station. User Set mode. ■■Priority A channel selection When one of the following operations is performed, the transceiver automatically selects Priority A channel. • Turning ON the power AUTOMATIC SCAN TYPE: Channel setting is not necessary for this type. When turning ON the power, the transceiver automatically starts scanning. Scanning stops when a signal is received. Priority A channel is selected each time the transceiver's power is turned ON. • Auto Reset Priority A channel is selected when the Auto Reset timer ends. • OFF hook Priority A channel is selected when you take the micro- phone OFF hook. 9