Icom IC-F4230D Instruction Manual - Page 25
SPEAKER MICROPHONE, ■ Optional HM-168LWP description, ■ Attaching
![]() |
View all Icom IC-F4230D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
6 SPEAKER MICROPHONE ■■ Optional HM-168LWP description Alligator type clip To attach the speaker-mic. to your shirt or collar, etc. PTT switch Transmits while pushed Receives while released Microphone Speaker Turn the transceiver power OFF when connecting the HM-168LWP. NEVER immerse the connector in water. If the connector becomes wet, be sure to dry it BEFORE attaching it to the transceiver. NOTE: The microphone is located as shown in the diagram above. To maximize the readability of your transmitted signal (voice), hold the microphone approximately 5 to 10 cm (2 to 4 inches) from your mouth, and speak in a normal voice level. ■■Attaching Attach the connector of the speaker-microphone into the [SP MIC] jack on the transceiver and tighten the screws with your fingers. NOTE: Use only your fingers instead of tools to tighten the screws. CAUTION: Attach the connector snugly. A loose connection will allow water intrusion into the connector. Hand tighten IMPORTANT: Keep the [SP MIC] jack cover attached to the transceiver when the speaker-microphone is not in use. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 20
![](/manual_guide/products/icom-icf3230d-instruction-manual-a3d31b5/25.png)