Icom IC-F4230D Instruction Manual - Page 6

1 ACCESSORIES ■■Supplied accessories NOTE: Some accessories are not supplied, depending on the transceiver version. Battery pack Battery charger* Belt clip Power adapter* (for the battery charger) Flexible antenna* (This illustration is of the VHF type.) *Not supplied, or the shape is different, depending on the transceiver version. DDBattery pack To attach the battery pack: Slide the battery pack in the direction of the arrow (q) until the battery release button makes a 'click' sound. NOTE: Push on the bottom of the pack to make sure the release button is firmly locked. To release the battery pack: Slide the battery release button in the direction of the arrow (w) as shown below. The battery pack is then released. NEVER release or attach the battery pack when the transceiver is wet or soiled. This may result water or dust getting into the transceiver/battery pack and may result in the transceiver being damaged. ■■Accessory attachments DDFlexible antenna Connect the supplied flexible antenna to the antenna connector. CAUTION: • NEVER carry the transceiver by holding only the antenna. • DO NOT connect an antenna other than those listed on page 24. • Transmitting without an antenna may damage the transceiver. 1 q Battery release button w NOTE: Keep battery terminals clean. It's a good idea to occasionally clean them.