Icom IC-F6061D Operating Guide - Page 27

4 LTR OPERATION ■ LTR operation D Phone call 1 q Push [CH Up] or [CH Down] to select the phone chan- Push [Zone], then push [CH Up] or [CH Down]* to select nel. 2 the LTR zone. • " " appears. 3 * The way of selecting the desired zone may differ, depending on w When a phone call is received (transceiver rings), push your system set up. [Phone] (or push [PTT]). 4 NOTE: In the LTR mode, BIIS 1200 and IDAS modes are • " " blinks. Blinks 5 disabled. 6 ■ Receiving a call 002 ch-03 7 fH 173.7M 8 D Group call 9 q When a call is received: • LED lights green. e Hold down [PTT], then speak at a normal voice level. Re- lease [PTT] to return to receive. 10 w Hold down [PTT], then speak into the microphone at a normal voice level. r After conversation is finished, push [Phone] to disconnect the phone call. 11 e R elease [PTT] to return to receive. • " " stops blinking. 12 D Selective call (DTMF call) 13 q Push [Call] to mute the channel. 14 w When receiving a call, the calling station name appears and a beep sounds. Then the mute is released. 15 • " " appears. 16 Appears 002 ch-03 fH 173.7M 24