Icom IC-F6061D Operating Guide - Page 6
BIIS 1200 OPERATION, ■ Setting example, ■ Receiving a call
View all Icom IC-F6061D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2 BIIS 1200 OPERATION ■ Setting example ■ Receiving a call The following key functions are recommended to be assigned to each programmable key for BIIS 1200 operation. The key functions can be assigned by your dealer. Ask your dealer for details. NOTE: During BIIS 1200 operation, the MDC 1200 system, LTR and IDAS operations are disabled. D Individual call q When an individual call is received: • Beeps sound. • " " appears and the mute is released. • " " appears or blinks, depending on the presetting. • Your own ID (or text) and the calling station ID (or text) blink. Appears Appears or blinks [Call] : Push to transmit a BIIS call when the selected channel is an MSK channel. [BIIS Button] : Push to select the call list ID/transmit message, or a displayed receive mes- sage record. • T he key indicator appears above the key that this key function is assigned to, while it is acti- vated. See the instruction manual for details. [TX Code Enter] : P ush to directly enter the ID code edit mode, then push [CH Up] or [CH Down] to set the desired digit. [Moni (Audi)] : When your communication in the MSK channel mode is finished, push this key to send a 'Clear down' signal. [CH Up]/[CH Down]: While in the standby mode, push to se- lect an operating channel. After pushing [BIIS Button] or [TX Code CH Enter], push to select a call list or TX code digit, respectively. 0001 1234 Your own ID Calling station ID w Hold down [PTT], then speak into the microphone at your normal voice level. • The LED lights red. e Release [PTT] to return to receive. • The LED indicator lights green while receiving a signal. r To end the call, push [Moni(Audi)] to send the 'Clear down' signal. • Either station can send a 'Clear down' signal. • "CLR DOWN" is displayed for approximately 2 seconds. • The " " icon disappears and the transceiver returns to the standby mode. 3