Icom IC-F6061D Operating Guide - Page 46

5 IDAS OPERATION D Direct ID input Depending on the presetting, you may be able to directly input the desired ID. The optional HM-152T is required. q P ush [Digital Button] to enter the Individual or Talkgroup ID selection mode, then push the appropriate digit key, [0] to [9], to input the desired ID (up to 5 digits). • Push [M] to delete an input digit. VOICE 12345 The entered Individual or Talkgroup ID w A fter inputting, push [PTT] to transmit to the station or talk- group. D Transmitting an Emergency Call When [Emergency] (described in the instruction manual) is held down for a specified time period, the emergency signal (digital command) is transmitted once or repeatedly* on the emergency channel. When no emergency channel is specified, the signal is transmitted on the operating channel. * W hen the Repeat Cancel function is ON, the transceiver cancels repeating after receiving an acknowledgement. When the Repeat Cancel function is OFF, the transceiver repeats calling according to the number of repeat cycles, even after receiving an acknowledgement. This function is usable in transceivers whose revision number is 3.0 or later. Ask your dealer for details. Individual or Talkgroup type of emergency calls can be preset. If the call type is not preset, the default or selected call type is used. This function is usable in transceivers whose revision number is 2.9 or later. Ask your dealer for details. If you want to cancel the emergency call, hold down the key again before transmitting the call. The emergency call can be transmitted without a beep sounding, and the LCD lighting, depending on the presetting. (Silent operation) The transceiver can also be programmed to keep the microphone open during an emergency call, allowing monitoring of the situation. Ask your dealer for details. 43