Icom IC-F6061D Operating Guide - Page 5
For Ltr Operation Only, Phone Key, Digital Button Key, Status Up/down Keys, Key Enter Key
View all Icom IC-F6061D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
PREPARATION 1 1 D For LTR operation only STATUS UP/DOWN KEYS 2 PHONE KEY Push to connect or disconnect the telephone network. D For IDAS operation only DIGITAL BUTTON KEY ➥ Push to enter the application selection mode. ➥ When a received SDM is displayed, push to cancel the 3 automatic scroll and manually scroll the message. ➥ When an SDM that contains more than 12 characters is 4 displayed, push to manually scroll the message. 5 10-KEY ENTER KEY 6 ➥ Hold down for 1 second to toggle the call type between Push to enable the microphone's 10-key pad operation to se- 7 Individual and Talkgroup, and then automatically enter the lect the memory channel, status message number, and so on, application selection mode. depending on the presetting. Ask your dealer for details. 8 • Push [CH Up] or [CH Down] to select the desired "VOICE," "CALALERT," "STUN," "KILL," "REVIVE," "REM MON," SITE SELECT KEY "SSEL" 9 "RADIOCHK," "STATUS," "MSG," "STAT POL" and "CALL LOG" This key allows you to manually select the desired site without 10 application. ➥ While in the application selection mode, push to enter the roaming scan operation. • This function is usable in transceivers whose revision number is 4.6 11 Individual or Talkgroup ID selection mode. • If "STATUS" or "MSG" is selected as the application, the message or later. Ask your dealer for details. 12 selection mode appears. Push [CH Up] or [CH Down] to select the desired message, then push the Digital Button key again to enter the Individual or Talkgroup ID selection mode. (pp. 39, 40) NOTE: This key can be used for only Multi-site Trunking 13 mode. 14 ➥ In the application selection mode, hold down for 1 second to return to the normal operating mode. q P ush [Site Select] to show the Site Select screen. w P ush [CH Up] or [CH Down] to select the desired site from the preprogrammed roaming list*. 15 16 * The valid roaming areas (up to 48) are listed on the roaming list. Ask your dealer for details. e P ush [Site Select] again to set the selected site, and return to the stand-by mode. r T he transceiver tries to register to the selected site. 2