Icom IC-M85 Instruction Manual - Page 27

AquaQuake Action, Man Down Alarm, Lone Worker Alarm, Auto Volume Up, MOB Alarm, Top key

Page 27 highlights

SET MODE 9 DDAquaQuake Action " " DDAuto Volume Up " " 1 (Not displayed when using an optional battery case.) Turns the Auto Volume Up function ON or OFF. 2 Selects whether or not to activate the AquaQuake water draining function by shaking the transceiver. ••OFF: The function is OFF. ••ON:  The volume level is automatically 3 LLThis function is not usable when using an optional battery case. ••OFF: While holding down [H/L], push [FAV] to turn ON the function. increased when a signal is received in 4 a noisy environment while the ship is pitching or rolling. 5 ••ON: You can use the function by just shaking the transceiver 6 within 30 seconds, after the water is detected. DDMOB Alarm " " (Not displayed when using an optional battery case.) 7 DDMan Down Alarm " " Turns the MOB Alarm function ON or OFF. 8 Sets the emergency mode detection angle to between 45, 60, or 75 degrees for the Man Down Alarm function. This function is used when you fallen into the water and needs to be rescued. 9 If the transceiver leans past the set angle for the preset period of time, an alarm sounds.* LLPush [PTT] to stop the alarm. LLThis function is not usable when using an optional battery case. 10 *An alarm sounds from the transceiver's speaker, even if an optional speaker microphone is connected. 11 *An alarm sounds from the transceiver's speaker, even if an optional speaker microphone is connected. ••OFF: ••ON: The function is OFF. An alarm sounds while the transceiver is in 12 the water. 13 DDLone Worker Alarm " " 14 Turns the Lone Worker Alarm ON or OFF. If no operation occurs for the preset period of time, an alarm sounds.* DDTop key " " Selects the function to execute when you push [TOP]. 15 LLPush [PTT] to stop the alarm. *An alarm sounds from the transceiver's speaker, even if an ••OFF: No function is assigned. ••Scrambler: Push to turn ON or OFF the Voice 16 optional speaker microphone is connected. Scrambler function. ••OFF: The function is OFF. ••ON: If no operation occurs during a specified period of time, the transceiver automatically enter the Emergency mode. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

22
9
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
AquaQuake Action
(Not displayed when using an optional battery case.)
Selects whether or not to activate the AquaQuake water
draining function by shaking the transceiver.
L
This function is not usable when using an optional battery case.
• OFF:
While holding down [H/L], push [FAV] to turn ON
the function.
• ON:
You can use the function by just shaking the transceiver
within 30 seconds, after the water is detected.
D
Man Down Alarm
Sets the emergency mode detection angle to between 45,
60, or 75 degrees for the Man Down Alarm function.
If the transceiver leans past the set angle for the preset
period of time, an alarm sounds.*
L
Push [PTT] to stop the alarm.
*An alarm sounds from the transceiver’s speaker, even if an
optional speaker microphone is connected.
D
Lone Worker Alarm
Turns the Lone Worker Alarm ON or OFF. If no operation
occurs for the preset period of time, an alarm sounds.*
L
Push [PTT] to stop the alarm.
*An alarm sounds from the transceiver’s speaker, even if an
optional speaker microphone is connected.
• OFF:
The function is OFF.
ON:
If no operation occurs during a specified period
of time, the transceiver automatically enter the
Emergency mode.
D
Auto Volume Up
Turns the Auto Volume Up function ON or OFF.
• OFF:
The function is OFF.
• ON:
The volume level is automatically
increased when a signal is received in
a noisy environment while the ship is
pitching or rolling.
D
MOB Alarm
(Not displayed when using an optional battery case.)
Turns the MOB Alarm function ON or OFF.
This function is used when you fallen into the water and
needs to be rescued.
L
This function is not usable when using an optional battery case.
*An alarm sounds from the transceiver’s speaker, even if an
optional speaker microphone is connected.
• OFF:
The function is OFF.
• ON:
An alarm sounds while the transceiver is in
the water.
D
Top key
Selects the function to execute when you push [TOP].
• OFF:
No function is assigned.
• Scrambler:
Push to turn ON or OFF the Voice
Scrambler function.