Icom IC-M85 Instruction Manual - Page 31
Using the HM-222
View all Icom IC-M85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
■■Using the HM-222 [H/L] Microphone [PTT] Speaker Earphone jack Turn OFF the transceiver before attaching or detaching the microphone NOTE: ••NEVER immerse the connector in water. If the connector becomes wet, BE SURE to dry it before attaching to the transceiver. ••The microphone element is located at the top left of the speaker microphone, as shown in the illustration above. To maximize the readability of your transmitted audio, hold the microphone approximately 5 to 10 cm (2 to 4 inches) from your mouth, and then speak at your normal voice level. SPECIFICATIONS AND OPTIONS 10 Belt clip 1 2 3 4 5 You can connect 6 an earphone (user supplied) to the 7 earphone jack on the microphone. 8 To attach: 9 Attach the connector of the speaker microphone to 10 the multi connector on the transceiver and tighten the screw. 11 Turn OFF 12 13 Screw 14 15 Coin 16 CAUTION: Firmly attach to the multi connector, but do not overtighten. A loose connection will allow water intrusion into the connector. Overtightening the connection can damage the transceiver. 26