Icom IC-M85UL Instruction Manual - Page 25

SET MODE 9 ■■Set mode items NOTE: The Set mode items contained in the transceiver may be different, depending on the transceiver's version or presettings. Ask your dealer for details. DDBeep " " Turns the Key Beep function ON or OFF. ••OFF: Turns OFF the function for silent operation. ••ON: When a key is pushed, a beep sounds. DDWX Alert " " Turns the Weather Alert function ON or OFF. This function detects the Weather Alert tone on Weather channels. ••OFF: The transceiver does not detect a Weather Alert tone. ••ON: The transceiver detects the 1050 Hz Weather Alert tone on a Weather channel. DDScan Type " " Turns the Priority Scan function ON or OFF. ••OFF: The scan type is set to "Normal," which sequentially searches all Favorite channels in the channel group. ••ON: The scan type is set to "Priority," which sequentially searches all Favorite channels in the channel group, while also periodically checking Channel 16 (Priority channel). 1 DDScan Timer " " 2 Turns the Scan Resume Timer ON or OFF. 3 ••OFF: When a signal is detected on a channel, the scan pauses until the signal disappears, and then 4 resumes. 5 ••ON: When a signal is detected on a channel, the scan pauses for 5 seconds, and then resumes. If 6 the signal disappears in less than 5 seconds, the 7 scan immediately resumes. 8 DDAuto Scan " " 9 Turns the Automatic Scan function ON or OFF. ••OFF: The function is OFF. 10 ••ON: Scan automatically starts when no signal is 11 received, or no operations are carried out for 30 seconds. 12 13 DDDual/Tri-watch " " 14 Selects the watch type. ••d- (Dual): The watch type is set to Dualwatch, which 15 monitors Channel 16, even while receiving a 16 signal on another channel. ••t- (Tri): The watch type is set to Tri-watch, which monitors Channel 16 and the Call channel, even while receiving a signal on another channel. 20