Icom IC-M85UL Instruction Manual - Page 27
AquaQuake Action, Man Down Alarm, Lone Worker Alarm, Auto Volume Up, MOB Alarm
View all Icom IC-M85UL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
DDAquaQuake Action " " Selects whether or not to activate the AquaQuake water draining function by shaking the transceiver. ••OFF: While holding down [H/L], push [FAV] to turn ON the function. ••ON: You can use the function by just shaking the transceiver within 30 seconds, after the water is detected. DDMan Down Alarm " " Sets the emergency mode detection angle to between 45, 60, or 75 degrees for the Man Down Alarm function. If the transceiver leans past the set angle for the preset period of time, an alarm sounds.* LLPush [PTT] to stop the alarm. *An alarm sounds from the transceiver's speaker, even if an optional speaker microphone is connected. SET MODE 9 DDLone Worker Alarm " " 1 Turns the Lone Worker Alarm ON or OFF. 2 If no operation occurs for the preset period of time, an alarm sounds.* 3 LLPush [PTT] to stop the alarm. 4 *An alarm sounds from the transceiver's speaker, even if an optional speaker microphone is connected. 5 ••OFF: The function is OFF. ••ON: If no operation occurs during a specified period 6 of time, the transceiver automatically enter the 7 Emergency mode. 8 DDAuto Volume Up " " 9 Turns the Auto Volume Up function ON or OFF. 10 ••OFF: The function is OFF. ••ON: The volume level is automatically increased when 11 a signal is received in a noisy environment while the ship is pitching or rolling. 12 13 DDMOB Alarm " " 14 Turns the MOB Alarm function ON or OFF. This function is used when you fallen into the water and 15 needs to be rescued. 16 *An alarm sounds from the transceiver's speaker, even if an optional speaker microphone is connected. ••OFF: The function is OFF. ••ON: An alarm sounds while the transceiver is in the water. 22