Icom IC-SAT100 Basic Manualeng/ger/esp/fra/ita - Page 12

4 BASIC OPERATION ■ Receiving and transmitting D Turning ON the transceiver z Rotate [VOL] to turn ON the transceiver. • The transceiver searches a satellite. • When the transceiver connected and registered to the satellite, the status "IDLE," transceiver name, and Talkgroup name is displayed. L Push [Last Call] to playback the received call.* *See page 9 of the IC-SAT100 OPERATING MANUAL for Last Call Play function details. L Push [UP] or [DOWN] to display the Talkgroup List. L Rotate Talkgroup selector to select a talkgroup. D Receiving When receiving, "LISTENING," and the source transceiver's name is displayed, and audio should be heard. L Rotate [VOL] to adjust the audio output level. LISTENING TRANSCEIVER02 TALKGROUP01 D Transmitting CAUTION: DO NOT transmit without an antenna. 1. Hold down [PTT]. L "REQUESTING" is displayed while the transceiver requests the transmission. 2. When "TALKING" is displayed, speak at your normal voice level. L You can continuously transmit up to the period of time allowed by the system. TALKING TRANSCEIVER01 TALKGROUP01 Last Call Scan NOTE: • If the connection becomes poor while transmitting, the transceiver sounds the beep "PuPu" in 1.5 seconds interval. • You cannot transmit while listening to the received audio. Before transmitting, confirm the receiving is finished by the beep "Pi" and the display "OPEN." Last Call Ignore BASIC MANUAL NOTE: • The transceiver receives and transmits using several satellites orbiting the same orbit. Receiving and transmitting may fail depending on the satellite position or any obstacles between the transceiver and satellites. • Your body can also be an obstacle. Do not hook the transceiver on your waist. 11 D Scan and Ignore [Scan] Push to scan a call. [Ignore] Push to ignore the received call. L The Ignore function will be canceled if there are no more calls for 90 seconds or longer.