Icom ID-51A Basics Guide - Page 27

Step 2, Step 1

Get Icom ID-51A PDF manuals and user guides View all Icom ID-51A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

3 CAPTURING A CALL SIGN STEP 1 Set the received call sign to the destination STEP 2 Hold down [PTT] to transmit Hold down for 1 second. • After releasing, beeps sound, and the station call sign is announced if the RX>CS Speech function is set to ON in the MENU screen. (MENU > SPEECH > RX>CS SPEECH) qqWhile holding down [PTT], speak at your normal voice level. 3 Beeps While holding down . Transmitting CAPTURING A CALL SIGN Blinks after selecting a call sign. wwPush or [CLR] to return to the previous call sign setting. Beeps JG3LUK After releasing . NOTE: • If you want to select another call sign in the RX history, rotate [DIAL] while holding down . • W hen a received signal is weak, DR mode scanning or the power save is ON, the call sign may not be received correctly. In that case appears, an error beep sounds, and a quick reply call cannot be made. Return to the previous screen 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
26
3
CAPTURING A CALL SIGN
3
CAPTURING A CALL SIGN
STEP 2
Hold down [PTT] to transmit
Hold down
for 1 second.
• After releasing, beeps sound, and
the station call sign is announced if
the RX>CS Speech function is set
to ON in the MENU screen.
(MENU > SPEECH >
RX>CS SPEECH
)
Blinks after select
-
ing a call sign.
NOTE:
• If you want to select another call sign in the RX history,
rotate [DIAL] while holding down
.
• When a received signal is weak, DR mode scanning or
the power save is ON, the call sign may not be received
correctly. In that case, “--------” appears, an error beep
sounds, and a quick reply call cannot be made.
While holding down [PTT],
q
speak at your normal voice
level.
Transmitting
Push
w
or [CLR]
to
return to the previous call sign
setting.
Beeps
STEP 1
Set the received call sign to the destination
While holding down
.
Beeps
After releasing
.
JG3LUK
Return to the previous
screen