Icom ID-51A Basics Guide - Page 40

Recording A Qso Onto A Microsd Card

Get Icom ID-51A PDF manuals and user guides View all Icom ID-51A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

10 Recording a QSO onto a microSD card ■■About using a microSD card DDUsable microSD cards A microSD or microSDHC card is not supplied with the transceiver. Please purchase a card to use. Read the instructions of the microSD card thoroughly before use. Icom has checked the compatibility of the following microSD and microSDHC cards: • Icom does not guarantee the card's performance. (As of December 2012) Maker Kind of the card Capacity microSD 2 GB SanDisk® microSDHC 4 GB 8 GB 16 GB 32 GB BE CAREFUL! While reading or writing data from or to the card; NEVER turn OFF the transceiver. It will corrupt the data or damage the card. Also be careful in the following cases: • W hen using the transceiver with the BP-273 battery case, and the batteries are near exhaustion. • W hen using the transceiver with an external DC power source and the battery pack is not attached, then the external power is turned OFF. 39 STEP 1 Inserting the microSD card qqTurn OFF the transceiver. wwLift OFF the [micro SD] slot cover on the side panel. eeWith the terminals facing the front, insert the card into the slot until it locks in place, and makes a 'click' sound. BE CAREFUL! • DO NOT touch the terminals. • T o remove the card, push in to release it, then carefully pull out the card. • W hile reading or writing data from and to the card, NEVER remove the card. It will corrupt the data or damage the card. rrFirmly close the [micro SD] slot cover. NEVER forcibly or inversely insert the card. It will damage the card and/or the slot. [micro SD] slot microSD card Terminals facing the front Slot cover

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
39
RECORDING A QSO ONTO A microSD CARD
10
About
■
using a microSD card
Usable microSD cards
D
A microSD or microSDHC card is not supplied with the
transceiver. Please purchase a card to use.
Read the instructions of the microSD card thoroughly be-
fore use.
Icom has checked the compatibility of the following microSD
and microSDHC cards:
• Icom does not guarantee the card’s performance.
(As of December 2012)
Maker
Kind of the card
Capacity
SanDisk
®
microSD
2 GB
microSDHC
4 GB
8 GB
16 GB
32 GB
BE CAREFUL!
While reading or writing data from or to the
card;
NEVER
turn OFF the transceiver. It will corrupt the
data or damage the card.
Also be careful in the following cases:
• When using the transceiver with the BP-273 battery case,
and the batteries are near exhaustion.
• When using the transceiver with an external DC power
source and the battery pack is not attached, then the ex
-
ternal power is turned OFF.
Turn OFF the transceiver.
q
Lift OFF the [micro SD] slot cover on the side panel.
w
With the terminals facing the front, insert the card into the
e
slot until it locks in place, and makes a ‘click’ sound.
BE CAREFUL!
•
DO NOT
touch the terminals.
• To remove the card, push in to release it, then carefully
pull out the card.
• While reading or writing data from and to the card,
NEVER
remove the card. It will corrupt the data or
damage the card.
Firmly close the [micro SD] slot cover.
r
STEP 1
Inserting the microSD card
NEVER
forcibly or in-
versely insert the card.
It will damage the card
and/or the slot.
[micro SD] slot
microSD card
Terminals facing
the front
Slot cover