Icom ID-51A Basics Guide - Page 38
Saving Settings
![]() |
View all Icom ID-51A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
9 Saving settings When "FROM" (Access repeater) and "TO" (Destination) settings are saved, the settings can be selected by rotating [DIAL]. STEP 1 Saving settings into memory In the DR mode, select the settings to be saved into memory. Shows the settings to be saved. DR mode screen qqHold down [S.MW] for 1 second to enter the Select Memory write mode. Blinks Select Memory write mode Go to step w Beeps NOTE: DO NOT hold down [S.MW] for more than 2 seconds. Otherwise the setting contents will be copied to the VFO. 37 wwRotate [DIAL] to select a blank channel. • W hen a channel that is already programed is selected, the memory name will not be programmed. eeHold down [S.MW] for 1 second to save the settings into the channel. • 3 beeps sound. • Before returning to the DR mode, the saved memory contents are briefly displayed. • "FROM" and "TO" names are automatically programmed as the Memory name. Up to 16 alphanumeric characters can be programmed for the memory name. Blinks
![](/manual_guide/products/icom-id51a-basics-guide-1dba56e/38.png)