Icom IP501H Instruction Manual - Page 34

4 SET MODE ■ Set mode item list The shaded items (■■) are also displayed in the Basic Set mode. LItems or default values may differ, depending on the presetting. Ask your dealer for details. Item Description Option/range Default LOG Deletes logs. - - - , CLR (Clear) --- Initializes the transceiver. Reset Returns to the default values except the Bluetooth NO or YES NO pairing list. FIRM UP Updates the firmware. NO or YES NO Success Tone Sets the successful tone for Individual calls. LThe success or failure result is also displayed on the screen. Disable or Enable Enable Failure Tone Sets the failure tone for Individual calls LThe success or failure result is also displayed on the screen. Disable or Enable Enable IND Call Tone GRP Call Tone ALL Call Tone TEL Call Tone* Sets the call initiation tone. Disable, Tone1 ~ Tone8 LLarger number makes the tone lower. Tone1 (Pi) IND Crtsy Beep GRP Crtsy Beep ALL Crtsy Beep TEL Crtsy Beep* Sets the call termination tone. Disable, Tone1 ~ Tone8 LLarger number makes the tone lower. Tone1 (Pi) IND RX Tone Grp RX Tone All RX Tone Tel RX Tone* Sets the call receive tone. Disable, Tone1 ~ Tone8 LLarger number makes the tone lower. Disable MSG RX Tone IND Notify Type GRP Notify Type ALL Notify Type Sets the call receive notification type. Pocket beep or P-Bell P-Bell TEL Notify Type* IND Notify No. GRP Notify No. ALL Notify No. Sets the number of tone. Continuous, 1, 3, 10, 20 (times) 3 (times) TEL Notify No.* MSG Notify No. RX Notify Actn. Sets the call or message receive notification type. Tone, Vibration, Notification Beep + Vibration Tone RX Notify Vol. Sets the call or message receive notification volume. 0 ~ 32 10 Out of Rng Tone Sounds the out-of-area warning beep. The beep also sounds when the transceiver reenters the service area. (O ut-of-area: "Pipi," Reenters："Popo") Disable or Enable Disable Range Side Tone Mutes the sidetone when the transceiver is outof-area. *Feature in the near future. 4-4 Disable or Enable Disable