Icom IP501H Instruction Manual - Page 52
Enter the Pairing mode with the BC-218
View all Icom IP501H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
5 OPTIONAL PRODUCTS ■ Pairing the IP501H/IP503H with the BC-218 or VS-3 (continued) 2. Enter the Pairing mode with the BC-218 1. Connect the optional HM-215 to the BC-218. 2. When the Bluetooth function is OFF, hold down the Bluetooth button of either the BC-218 or HM-215) for approximately 6 seconds until the Bluetooth indicator starts alternately blinking red and blue. ••A beep sounds. 3. Release the Bluetooth button. LIf the pairing list is blank, the BC-218 automatically enters the Pairing mode when the BC-218 is turned ON. LIf 5 minutes has passed without any device paired, the Pairing mode is automatically canceled. After another 5 minutes has passed, the BC-218's power is automatically turned OFF. Bluetooth indicator Bluetooth button BC-218 Bluetooth button HM-215 Bluetooth indicator 2. Enter the Pairing mode with the VS-3 1. When the Bluetooth function is OFF, hold down [PWR] for approximately 6 seconds (until the LED starts alternately blinking red and blue). ••A beep sounds. 2. Release [PWR]. LIf the pairing list is blank, the VS-3 automatically enters the Pairing mode when the VS-3 is turned ON. LIf 5 minutes has passed without any device paired, the Pairing mode is automatically canceled. After another 5 minutes has passed, the VS-3's power is automatically turned OFF. Earphone (3.5 (d) mm) Example L R LED [PWR] 5-14