Icom M510 Instruction Manual - Page 33
Entering the position and time, Deleting an entered ID
View all Icom M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
7 DIGITAL SELECTIVE CALLING (DSC) DDDeleting an entered ID (Example: Deleting an Individual ID: STATION 2) 1 1. Open the "Individual ID" screen. [MENU] > Settings > DSC > Individual ID 2 2. Select "STATION 2," and then push Delete . 3 ••"Delete the ID. Are You Sure?" is displayed. 3. Push OK to delete. LL Push Cancel to cancel the deletion. 4 ••The selected ID is deleted, and then returns to the 5 previous screen. TIP: You can edit an ID and its name by pushing Edit 6 in step 2. 7 ■■ Entering the position and time 8 A Distress call should include the vessel's position, date, and time. If no GPS data is 9 received, manually enter the position and Universal Time Coordinated (UTC) time. NOTE: 10 ••The manual entry is disabled while valid GPS data is received. 11 ••The manually entered position and time is valid only for 23.5 hours, or until turning OFF the transceiver. 12 1. Open the "Position Input" screen. 13 [MENU] > Settings > DSC > Position Input 14 2. Enter the latitude. 15 TIP: ••Select a number or a compass direction using [▲], 16 and [►]. ••Select "←" or "→" on the screen, or rotate 17 [CH/ENT] to move the cursor. ••Select Next and then push [ENT] or [CH/ENT] to 18 save the selected number. 3. Enter the longitude and the UTC time. LL See the TIP in step 2 to enter. 4. After entering, push Finish to save, and return to the previous screen. ••The "DSC" screen is displayed. 20