Icom M510 Instruction Manual - Page 50
Receiving a Distress Relay call, When a Distress Relay call is received
View all Icom M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
7 DIGITAL SELECTIVE CALLING (DSC) DDReceiving a Distress Relay call When a Distress Relay call is received: ••An alarm sounds. ••The following screen is displayed and the backlight blinks blinks. 1. Push any Alarm OFF . 2. Push the Software Key below the next operation. Ignore : Hold : Returns to the operating screen. The call is saved in the DSC Log. " " blinks continuously until you display the call message. Holds the RX call task, and returns to the Main screen. Pause : Accept : Pause is not displayed if the "CH Auto Switch" item is set to "Manual." (p. 46) Pauses the countdown until the assigned channel is automatically selected. Select Resume to resume the countdown. The call is saved in the DSC Log. Accepts the call. Channel 16 is automatically selected. Monitor Channel 16 as a coast station may require assistance. After Channel 16 is selected, select your next operation by pushing the Software Key below the following options. STBY : Returns to the operating screen. History: Displays the "Distress History" screen. 3. Push STBY , and then OK to return to the operating screen. 37