Image Fitness 12.2qi English Manual - Page 11

CALSJFAT CALSJ PULSE display-This display shows three CALS. / FAT CALS. / PULSE 0 Air different numbers: the approximate number of calories you have burned, the number of fat calories you have burned, and your heart rate (if the heart rate monitor is worn). The display will change from one number to the next every seven seconds. (If the fitness program is selected, your heart rate will be dis- played continuously). When your heart rate is shown, the heart-shaped indicator in the display will flash with each heartbeat; when the number of fat calories is shown, the "fat" indicator will light; when the number of calories is shown, no indicator will light. Note: When the heart rate monitor is first put on, it may take up to ten seconds for an accurate heart rate to be shown. SPEED display-This display shows the speed of the walking belt. If the KPH indi- SPEED V0H 1 C1 cator in the display is lit, the speed will be shown in kilometers per hour; if the indicator is dark, the speed will be shown in miles per hour. Note: To change the CALS.I FAT CALS. /PULSE unit of measurement, 0 first hold down the Air C STOP button while inserting the key into the console. The CALS./FAT CALS./ PULSE display will CALS. / FAT CALS. PULSE 0 1 11 II show an "E" for "English" (miles) or an "M" for "Metric" (kilometers). Press the SPEED "+" button to change the unit of measurement. Remove and then reinsert the key. When you are finished exercising, stop the walking belt and remove the key. Step onto the foot rails, press the STOP button, and remove the key from the console. Store the key in a secure place. In addition, press the on/off switch to the "off" position. (See the drawing on page 9.) 11