Image Fitness 12.5 Elliptical English Manual - Page 4

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included hex keys and your own phillips screwdriver mallet . and rubber As you assemble the elliptical exerciser, use the drawings below to identify the small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 21. The second number is the quantity used in assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it is preassembled. M4 x 16mm M10 Split M8 Split 7.6mm Spacer Round Head M4 x 16mm Washer (73)-2 Washer (85)-4 (47)-2 Screw (69)-4 Screw (94)-2 M8 x 44mm Button Screw (84)-8 M8 x 56mm Button Screw (83)-4 M8 x 79mm Bolt Set (65)-2 M10 x 108mm Button Screw (70)-2 1. Identify the Front Stabilizer (8). While another person lifts the front of the Frame (1) and holds the Pedal 1 Legs (4, 5) in the position shown, attach the Front 1 Stabilizer to the Frame with four M8 x 44mm Button 4, 5 Screws (84) and a Support Plate (64). While another person lifts the rear of the Frame (1), attach the Rear Stabilizer (not shown) to the Frame in the same way. 8 64 84 84 4