Image Fitness 3.8 English Manual - Page 8

two M10 x 70mm Bolts 46, a Small Support Plate

Get Image Fitness 3.8 PDF manuals and user guides View all Image Fitness 3.8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

5. Press a 25mm Round Inner Cap (51) into the end of 5 a Weight Storage Tube (21). While a second person holds a Crossbar (8) in the position shown, insert two M10 x 70mm Bolts (46) through the bracket on the Weight Storage Tube (21), the left Brace (2), and the bracket on the Crossbar (8). Thread an M10 Nylon Locknut (11) onto each Bolt. Do not tighten the Nylon Locknuts yet. 8 11 2 21 46 6. Press a 25mm Round Inner Cap (51) into the end of 6 the other Weight Storage Tube (21). While a second person continues to hold the Crossbar (8), insert two M10 x 70mm Bolts (46) through the bracket on the Weight Storage Tube (21), the right Brace (2), and the bracket on the Crossbar (8). Thread an M10 Nylon Locknut (11) onto each Bolt. Do not tighten the Nylon Locknuts yet. 51 46 21 46 2 8 46 51 7. Have a second person hold the other Crossbar (8). Attach the Crossbar (8) to the left Upright (1) with two M10 x 70mm Bolts (46), a Small Support Plate (16), and two M10 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. Attach the Crossbar (8) to the right Upright (1) with two M10 x 70mm Bolts (46), a Small Support Plate (16), and two M10 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. 7 46 16 46 11 11 11 1 8 11 11 1 16 46 46 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
8
5.
Press a 25mm Round Inner Cap (51) into the end of
a Weight Storage Tube (21).
While a second person holds a Crossbar (8) in the
position shown, insert two M10 x 70mm Bolts (46)
through the bracket on the Weight Storage Tube (21),
the left Brace (2), and the bracket on the Crossbar
(8). Thread an M10 Nylon Locknut (11) onto each
Bolt.
Do not tighten the Nylon Locknuts yet.
5
8
2
11
21
46
46
51
6.
Press a 25mm Round Inner Cap (51) into the end of
the other Weight Storage Tube (21).
While a second person continues to hold the
Crossbar (8), insert two M10 x 70mm Bolts (46)
through the bracket on the Weight Storage Tube (21),
the right Brace (2), and the bracket on the Crossbar
(8). Thread an M10 Nylon Locknut (11) onto each
Bolt.
Do not tighten the Nylon Locknuts yet.
6
46
51
46
2
21
8
11
7.
Have a second person hold the other Crossbar (8).
Attach the Crossbar (8) to the left Upright (1) with two
M10 x 70mm Bolts (46), a Small Support Plate (16),
and two M10 Nylon Locknuts (11).
Do not tighten
the Nylon Locknuts yet.
Attach the Crossbar (8) to the right Upright (1) with
two M10 x 70mm Bolts (46), a Small Support Plate
(16), and two M10 Nylon Locknuts (11).
Do not tight-
en the Nylon Locknuts yet.
7
46
16
46
11
11
11
8
11
16
46
46
1
1