Image Fitness 9.5 Elliptcal English Manual - Page 11

11. Orient the Right Upper Body Arm (5) so that 11 the indicated tube is facing inward. Lubricate the upper end of the right Upper Body Leg (6) with high-temperature lubricant. Then, slide the Right Upper Body Arm onto the Upper Body Leg. Then, slide the Pivot Axle (16) through the remaining Upper Body Spacer (29) and the Right Upper Body Arm (5). 16 5 Tube 29 6 Lubricate 12. Apply a small amount of grease to a Wave Washer (27). Slide an M8 Large Washer (81) and the Wave Washer onto an M8 x 25mm Patch Screw (70), and tighten the Patch Screw into the left end of the Pivot Axle (16). Then, press a Pivot Cover (14) against the Left Upper Body Arm (4). Repeat this step on the right side of the elliptical exerciser. 12 4 Grease 16 14 81 27 70 14 16 81 70 Grease 27 5 13. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser. 11