Image Fitness 9.5 Elliptcal English Manual - Page 8
Leg and the Ramp Wheel to the Left Pedal
View all Image Fitness 9.5 Elliptcal manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Orient an Upper Body Leg (6) and a Ramp 5 Wheel (24) as shown. Attach the Upper Body Leg and the Ramp Wheel to the Left Pedal Arm (21) with an M8 x 63mm Bolt Set (67) and two Wheel Covers (97). Repeat this step for the Right Pedal Arm (not shown). 6 21 97 24 97 67 Grease 67 6. Apply a small amount of grease to a Crank 6 Arm Spacer (45). Orient the Crank Arm Spacer so that the flange is on the side shown, and slide it onto the Left Crank Arm (42). Then, slide the Left Pedal Arm (21) onto the Left Crank Arm. Apply a small amount of grease to a Large Wave Washer (20) and press it against the Left Pedal Arm (21). Then, tighten an M8 x 25mm Patch Screw (70) with an M8 Washer (64) and a Pedal Leg Cover (23) into the end of the Left Crank Arm (42). Repeat this step for the Right Pedal Arm and the Right Crank Arm (not shown). 42 Grease 20 70 64 23 45 21 8