Insignia IS-HTIB102731 User Manual (English) - Page 16

English Operation 1. In stop mode, press PROGRAM on the remote control unit. The program mode display appears on the TV screen and the front panel display. TITLE 02 / 05 CHAPTER 001 / 006 TITLE 02 / 05 TIME 2. Use the number buttons (0~9) to input the track numbers in a desired order. 3. When you key in the number buttons (0~9), press the OK button to confirm. If you attempt to program more than 99 tracks, "FULL" will be displayed. 4. Repeat step 3 to add more tracks to the program list. 5. To begin program playback, press PLAY/ PAUSE ll or OK. 6. To stop playback, press STOP once. 7. To cancel the program, press STOP again. Notes: This function is not available when playing DVD and MP3 discs. To repeat playback for the programmed tracks, press REPEAT while in the program playback mode. The program sequence is cancelled when you press STOP twice, open the disc tray, or turn the power off. Selecting the Start Time This function allows you to start playback at any chosen time on the disc. When playing DVD discs, press GOTO: 1. Press GOTO repeatedly, to display the following menu on the television screen: - Use the / buttons to go to title or chapter. - Use the number buttons (0~9) to input the desired title or chapter number, and press OK to start playback from that selection. 16 When playing DivX discs 1. Press GOTO, the following menu appears on the TV screen: GOTO 2. Use the number buttons (0~9) to input the time, and press OK to start playback from that selection, but the time you enter must be less than the total time of the disc. Notes: This function is not available when playing MP3 disc.