Insignia IS-HTIB102732 User Manual (English) - Page 43
Problems
View all Insignia IS-HTIB102732 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
PROBLEMS If it appears that your DVD-Video player is faulty, first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself; as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player. * When the unit is switched on the first time, S-Video will be the default video output. Press the V-SELECT button to select the correct output modes. Your current output mode will show on the VFD. NO POWER • Check if the on/off button on the front of the player is set to on. • Check if the power cord plug of the mains cord is properly connected. • Check if there is power at the AC outlet by plugging in another appliance. THE PLAYER DOES NOT RESPOND TO THE REMOTE CONTROL • Aim the remote control directly at the sensor on the front of the player. • Avoid all obstacles which may interfere with the signal path. • Inspect or replace the batteries. NO PICTURE • Check if the TV is switched on. • Select the correct AV input on the TV. • Check the video connection. • Check if channel selector is set to AV on the TV. (See your TV manual for instructions). • When Progressive Scan is on, no video output for composite video output. • Press the V-SELECT button to select the correct video output mode. Otherwise no picture or distorted picture will be found. DISTORTED PICTURE • Check the disc for fingerprints and clean with soft cloth, wiping from center to edge. • Sometimes a small amount of picture distortion may appear. This is not a malfunction. • The disc format does not match the TV-set used (PAL/NTSC). • Ensure that ONLY one video output is connected. NO COLOR IN PICTURE • The disc format is the same as that of TV-set used (PAL/NTSC). • Ensure DVD player is not connected through VCR. PICTURE SWING • Relocate the unit further away from possible interference or emission sources (e.g. Radio, Power Amplifier, radiator etc.). NO SOUND • Check audio connections. • If using a Hi-Fi amplifier, try another sound source. • Check that DTS digital out is selected in the Audio Menu if a DTS disc is played. • Ensure there is a DTS decoder connected when selecting DTS. • Clean the disc. • Check if the disc is defective by trying another disc NO AUDIO AT DIGITAL OUTPUT • Check the digital connections • Check the Digital Out menu to make sure that the digital output is correctly set. • Check if the audio format of the selected audio language matches your unit capabilities. DISC CANNOT BE PLAYED • Ensure disc is placed properly into the disc tray. YOU HAVE FORGOTTEN THE PASSWORD • Under "No Disc" condition, press Number Key 7, Number Key 6, Number Key 4, Number Key 1 and Number 8 on Remote Control in order. FUNCTION DISTURBED • The normal function of the product may be disturbed by external interference. Just reset the product (disconnecting and reconnecting the power cord might be required to resume normal operation). NO RETURN TO START-UP SCREEN WHEN DISC IS REMOVED • Check to see if the program requires another disc to be loaded. • Reset by unplugging the player from the power, then connect the power again. GB 42