Insignia NS-27RTV User Manual (English) - Page 11

NS-27RTV 27-inch Color TV Using your television Notes • If you select a channel with no broadcast signal, the sound is automatically muted. • If a station you are viewing stops broadcasting, the television automatically shuts itself off after 15 minutes. To use the television: 1 Press POWER to turn on the television. 2 Adjust the volume level by pressing VOL + or -. The volume level is indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases. 3 Set the TV/CABLE menu option to the appropriate position (see "Selecting TV or cable" on page 9). 4 Press the direct channel selection buttons to select the channel. Selecting analog channels Channels Press 1-9 Press 0 twice, then 1-9 as needed. Example: to select channel 2, press 0 0 2. 10-99 Press 0, then the remaining 2 digits. Example, to select channel 12, press 0 1 2. 100-125 Press the 3 digits in order. Example, to select channel 120, press 1 2 0. Selecting digital channels Press the first 3 digits, then press the -/DISPLAY button, followed by the remaining 3 digits. Example, to select channel 015-001, press 0 1 5 - 0 0 1. TV Cable VHF 2-13 VHF 2-13 UHF 14-69 STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1) 100-125 (100) (125) 01 (5A) Seeking channels To seek the next channel: Press and release CH or . The channel automatically stops at the next channel set into memory. For proper operation, before seeking channels, they should be set into the memory. See "Memorizing channels" on page 9. Viewing information To view program information: 1 Press -/DISPLAY to display the current information on the screen. When the television receives a digital signal, the digital information appears: • Broadcast program name • Station name • Remaining time • Audio language • Program name • V-Chip rating • V-Chip mark • Closed caption mark When the television receives an analog signal, -/DISPLAY shows only analog information. 2 Press -/DISPLAY again. The analog information appears. • Clock • Channel number or video mode selected • Channel label (if preset) • Stereo or SAP (second audio program) audio status • Content rating • On timer, Off timer, Sleep time (if preset) • Picture size 3 Press -/DISPLAY again to clear the call display. Viewing the previous channel The QUICK VIEW button allows you to go back to the last channel viewed. Press QUICK VIEW again to return to the last channel you were watching. Muting the volume Press MUTE to turn off the sound. The television's sound is silenced and MUTE appears on the screen. The sound can be switched back on by pressing this button again or by pressing one of the VOL + or - buttons. Using sleep To set the television to turn off after a preset amount of time, press SLEEP on the remote control. The clock counts up ten (10) minutes for each press of the SLEEP button (0h00m, 0h10m, ...1h50m, 2h00m). After the sleep time is programmed, the display appears briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time is displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to 0h00m. Setting the V-Chip An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to TV rating and movie rating if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must set a password. 10 www.insignia-products.com