Insignia NS-27RTV User Manual (English) - Page 13

NS-27RTV 27-inch Color TV 7 Repeat steps 1 through 6 to lock other channels. When you have finished locking channels, press EXIT to return to normal viewing. If you try to tune a locked channel, the television does not display it, but displays the nearest unlocked channel. Unlocking channels To unlock locked channels: 1 Press MENU, then press or to display the LOCKS menu. 2 Press or to display the password entering mode. 3 Use the number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. 4 Press or to highlight CH LOCK and press or to display the CH LOCK menu. 5 Press or to highlight CLEAR and clear all channels from the list of locked channels. 6 Press ENTER. 7 Press EXIT to return to normal viewing. Locking the video inputs With the VIDEO LOCK feature, you can lock out the input sources (VIDEO1, VIDEO2, COMPONENT) and channels 3 and 4. You cannot select the input sources with the TV/AV button or channel buttons unless you clear the setting. Note After programming VIDEO LOCK, change the channel or press the TV/AV button before turning off the television. Failure to do so cancels the programming for video inputs locked using this procedure. To lock video inputs: 1 Press MENU. The menu screen appears. 2 Press or to select the LOCKS menu. 3 Press or to display the password entering mode. Use the number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. 4 Press or to highlight VIDEO LOCK. 5 Press or to select: • OFF: Unlocks all video sources. • VIDEO: Locks VIDEO1, VIDEO2, COMPONENT sources. • VIDEO +: Locks VIDEO1, VIDEO2, COMPONENT, channel 3, and channel 4. Use this option if you use the antenna terminal to play a video tape. 6 Press EXIT to return to normal viewing. Unlocking the video inputs To unlock locked video inputs: 1 Use the number buttons (0-9) to display the television channel you wish to lock. 2 Press MENU, then press or to display the LOCKS menu. 3 Press or to display the password entering mode. 4 Use the number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. 5 Press or to highlight VIDEO LOCK and press or to highlight OFF. 6 Press EXIT to return to normal viewing. Locking the front panel You can lock the front panel buttons to prevent your settings from being changed accidentally. When the front panel lock is ON, all control buttons on the television front panel (except POWER) will not operate. To lock the front panel: 1 Press MENU. The menu screen appears. 2 Press or to select the LOCKS menu. 3 Press or to display the password entering mode. Use the number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. 4 Press or to select FRONT PANEL LOCK and press or to select ON. If a button on the front panel is pressed, the message NOT AVAILABLE appears. 5 Press EXIT to return to normal viewing. Unlocking the front panel To unlock the front panel: 1 Press and hold VOLUME on the front panel of the television for about ten seconds until the message FRONT PANEL LOCK:OFF appears on the screen. -OR- Press MENU. The menu screen appears. 2 Press or to select the LOCKS menu. 3 Press or to display the password entering mode. Use the number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. 4 Press or to select FRONT PANEL LOCK and press or to select OFF. 5 Press EXIT to return to normal viewing. Labeling channels Channel labels appear over the channel number display each time you turn on the television, select a channel, or press -/DISPLAY. You can choose any four characters to identify a channel. Note To return from CH LABEL menu to the OPTION menu, select OPTION MENU, then press or . To label channels: 1 Select a channel you want to label. 2 Press MENU, then press or to select the OPTION menu. 3 Press or to select CH LABEL, then press or . The CH LABEL menu appears. 4 Press or to select SET/CLEAR. 5 Press or to select SET. 6 Press ENTER to select LABEL, then press or to enter a character in the first space. Press the button repeatedly until the character you want appears on the screen. 12 www.insignia-products.com