Insignia NS-43D420NA16 User Manual (English) - Page 20
Connecting a cable or satellite box, HDMI (best
View all Insignia NS-43D420NA16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
NS-39D220NA16/NS-43D420NA16/NS-50D420NA16/NS-50D420MX16 39"/43"/50" LED TV Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see What connection should I use? on page 14. You can connect a cable or satellite box using: • HDMI (best) • Component video (better) • AV (composite video) (good) • Coaxial (good) HDMI (best) On your TV Cable or satellite box Side of TV HDMI cable connector HDMI jack HDMI cable Cable wall jack 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the cable or satellite box. 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press S or T to highlight HDMI1, HDMI2, or HDMI3, then press ENTER. Note An HDMI cable carries both audio and video. You do not need to use any audio cables. www.insigniaproducts.com 15