Insignia NS-43D420NA16 User Manual (English) - Page 22
AV (composite video) (good), Notes, Important
View all Insignia NS-43D420NA16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
NS-39D220NA16/NS-43D420NA16/NS-50D420NA16/NS-50D420MX16 39"/43"/50" LED TV AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO / Y jack. On your TV AV cable AV cable connector Audio cable connectors Cable or satellite box AV jack Analog audio jacks Back of TV Cable wall jack 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to the green VIDEO / Y jack and L and R AUDIO jacks on the back of your TV and to the AV device and audio out jacks on the cable or satellite box. Important • The VIDEO / Y, PB, and PR video jacks (used to connect a component device) share the L and R AUDIO jacks with the VIDEO / Y jack (used to connect an AV device). You can only connect one component video or AV device at a time. We suggest upgrading to HDMI if your cable or satellite box supports it. • When you connect the audio using the L and R AUDIO jacks, the audio output is analog. 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press S or T to highlight Component/AV, then press ENTER. www.insigniaproducts.com 17