Insignia NS-43D420NA16 User Manual (English) - Page 21
Component video (better), Back of TV
View all Insignia NS-43D420NA16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Component video (better) Note Cables are often color-coded to match color-coded jacks. On your TV Audio cable Component video cable Component Audio cable video cable connectors connectors 39"/43"/50" LED TV Cable or satellite box Component Analog video jacks audio jacks Back of TV Cable wall jack 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a component video cable (not provided) to the VIDEO / Y, PB, and PR jacks on the back of your TV and the component video out jacks on the cable or satellite box. 4 Connect an audio cable (not provided) to the L and R AUDIO jacks on the back of your TV and to the audio out jacks on the cable or satellite TV box. Important • The VIDEO / Y, PB, and PR video jacks (used to connect a component device) share the L and R AUDIO jacks with the VIDEO / Y jack (used to connect an AV device). You can only connect one component video or AV device at a time. We suggest upgrading to HDMI if your cable or satellite box supports it. • When you connect the audio using the L and R AUDIO jacks, the audio output is analog. 5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 6 Press INPUT to open the INPUT SOURCE list. 7 Press S or T to highlight Component/AV, then press ENTER. 16 www.insigniaproducts.com