Insignia NS-CL01 User Manual (English) - Page 13

Insignia NS-CL01 Clock Radio with iPod® Dock To listen to another audio device: 1 Make sure the clock radio is turned off 2 Plug one end of the auxiliary line-in cable (not included) into the Line-in jack on the back of the radio. 3 Plug the other end of the cord into the Line-out jack on the audio device. 4 Turn on the radio. 5 Press FUNCTION one or more times until "Line-in" appears on the display. 6 Use the controls on the audio device to control playback. Setting the clock and the alarm To set the clock: 1 Press and hold TIME SET. The time blinks on the display. 2 Press MIN (minute) to set the minute and HR (hour) to set the hour. Make sure that you set the correct AM/PM setting. 3 Press TIME SET again. The clock is set. Note Press the TIME SET button to display the clock and current operation mode. If no key is pressed within 10 seconds, the radio returns to the previous operation mode automatically. To set the alarm: 1 Press and hold ALARM 1 or ALARM 2 (depending on the alarm mode you want) until the display blinks. 2 Press MIN (minute) to set the alarm minute and HR (hour) to set the alarm hour. Make sure to set AM/PM correctly. 3 Briefly press ALARM 1 or ALARM 2 again to save the setting. The display stops blinking. 4 To cancel the alarm, press ALARM 1 or ALARM 2 until the alarm indicator disappears from the display. To set the alarm to buzzer, radio, or iPod®: 1 Briefly press ALARM 1 or ALARM 2 (depending on the alarm mode you want). The time is displayed. www.insignia-products.com 13