Insignia NS-CL02 User Manual (English) - Page 13

Insignia NS-CL02 CD Clock Radio 2 Plug the small connector on the power cable into the DC IN jack on the back of the clock radio and the AC power adapter itself into an AC power outlet. Caution To protect your clock radio during thunderstorms, unplug the AC power adapter from the AC power outlet. Using your clock radio Dimmer Setting To set the backlight level: 1 Make sure the AC adapter is connected and the clock radio is turned on. 2 Slide the dimmer switch to set the display backlight to a comfortable level. Your choices include High, Mid, or Low. Playing the radio To play the radio: 1 Press (Standby/on) to turn on the clock radio. • To select the radio band you want to listen to, press STOP/ BAND/TIME SET repeatedly. • To tune the radio up or down and select the station you want, press SKIP +/FF/TUNE UP or SKIP-/FR/TUNE DOWN. • To adjust the volume to a comfortable level, press either the VOLUME UP or VOLUME DOWN button. • To scan to a higher or lower frequency, press and hold SKIP +/FF/TUNE UP or SKIP-/FR/TUNE DOWN for more than two seconds, then release the button to search for the next strong station. • To select FM MONO or FM STEREO, press MODE . 2 Press (Standby/on) to turn off the clock radio. To use presets: 1 Press (Standby/on) to turn on the clock radio. 2 Press STOP/BAND/TIME SET repeatedly to select the radio band you want to listen to. 3 Press SKIP +/FF/TUNE UP or SKIP-/FR/TUNE DOWN to tune the radio up or down and select the station you want. www.insignia-products.com 13